Safety technical specification for triethylene glycol monomethyl ether chemicals code: MSDS # 2691 Preparation date:
Three Propylene Glycol Monoethyl Ether, Safety Technical Instructions CAS No. 20324-33-8 | |||
first | Chemicals and corporate identification | Part 9 | Physical and chemical characteristics |
section two | Risk overview | Part 10 | Stability and reactivity |
part three | Composition/composition information | Part 10 | Toxicology information |
The fourth part | emergency treatment | Part 12 | Ecological information |
The fifth part | fire protection | Part 13 | Waste disposal |
Part VI | Emergency treatment of leakage | Part 14 | Transportation information |
Part 7 | Operational disposal and storage | Part 15 | Regulatory information |
Part 8 | Contact control and individual protection | The sixteenth part | Other information |
Part I: Chemicals and corporate identification | |||
Chinese name: | Three propylene glycol monomeethy1 ether | Chinese alias: | non-avaible |
English name: | Tripropylene glycolmonomethy1 ether | English alias: | non-avaible |
CAS No: | 10213-77-1 | Technical specification code: | MSDS#2691 |
Name of supplier: | Supplier Address: | ||
Suppliers Tel: | The Suppliers emergency telephone number: | ||
Supplier fax: | Supplier Email: |
Part two: Overview of the danger | |
Risk category : | non-avaible |
route of entry : | Inhalation of food into the percutaneous absorption |
health hazard: | Animal experiments belong to the low toxicity class. The toxic manifestations are mainly central nervous system inhibition and anesthesia state. The irritation to the eyes and skin is not obvious. |
environment hazards: | non-avaible |
Fire and explosion danger : | non-avaible |
Hazardous materials: | Three propylene glycol monethy1 ether |
content: | 100% |
Part 3: Composition/composition information | |
Hazardous materials: | Three propylene glycol monethy1 ether |
content: | 100% |
Part four: First-aid measures | |
skin exposure : | Rinse thoroughly with soapy water and water. seek medical advice. |
eye contact : | The eyelids were opened and washed with running water for 15 minutes. seek medical advice. |
inhalation: | Leave the scene to the fresh air. seek medical advice. |
ingestion: | By mistake, drink the right amount of warm water, vomiting. seek medical advice. |
Hazardous characteristics: | In case of open fire, high heat is combustible. Can react with the oxidants. Peroxides can be generated by exposure to air or under light exposure. |
Fire risk classification : | the third of the Ten Heavenly Stems |
Harmful combustion products: | Carbon monoxide, carbon dioxide. |
Fire extinguishing method: | Foam, carbon dioxide, dry powder. |
Part V: Fire protection measures | |
Hazardous characteristics: | In case of open fire, high heat is combustible. Can react with the oxidants. Peroxides can be generated by exposure to air or under light exposure. |
Fire risk classification : | the third of the Ten Heavenly Stems |
Harmful combustion products: | Carbon monoxide, carbon dioxide. |
Fire extinguishi ng method: | Foam, carbon dioxide, dry powder. |
Part VI: Emergency treatment of leakage | |
emergency handling: | Evacuate personnel in the contaminated area to the safe area, and prohibit irrelevant personnel from entering the contaminated area. It is recommended that emergency handling personnel wear anti-gas surface Have, wear general fire protective clothing. Prevent leakage from entering restricted space (e. g., sewer) to avoid explosion. Absorbed with sand, vermiculite or other inert materials, collected and transported to the waste treatment site. Such as a large amount of leakage, the use of embankment shelter, and then collection, transfer, recycling or harmless disposal after waste. |
Part VII: Operation, disposal and storage | |
Operational considerations : | non-avaible |
Storage considerations : | Store in a cool, ventilated storage compartment. Stay away from the fire and heat sources. Packaging shall be sealed and shall not be in contact with the air. Avoid light preservation. Should be stored separately from the oxidant. Should not last long. When handling, light loading and unloading to prevent damage to packaging and containers. |
Part 8: Contact control / personal protection | |
China MAC (mg/m3) : | non-avaible |
Former Soviet | non-avaible |
Union MAC (mg/m3) : | |
TLVTN: | non-avaible |
TLVWN: | non-avaible |
exposure limit : | US TLV-TWA : No standards developed US TLV-STEL: No standards developed |
Monitoring method: | non-avaible |
engineering control: | The production process is closed and fully ventilated. |
Respiratory System Protection: | Gas masks should be worn when potentially exposed to their vapor. |
eye protection : | Generally, special protection is not required, and safety protection glasses can be worn when exposed to high concentration. |
Body protection : | Wear work clothes. |
Hand protection : | No special protection is generally required. |
Other protection : | non-avaible |
Part 9: Physical and chemical characteristics | |||
pH: | non-avaible | melting point (℃) : | non-avaible |
boiling point (℃) : | 243 | molecular formula: | C10H22O4 |
basis: | non-avaible | Saturation vapor pressure (kPa) : | non-avaible |
Octanol / water partition coefficient : | non-avaible | critical temperatures (℃): | non-avaible |
flash point (℃): | 121 | Ignition temperature (℃) : 310 | non-avaible |
autogenous ignition temperature: | non-avaible | combustib ility: | combustible |
solubility: | dissolve in water. | Relative density (water =1) : | 0.967(25℃) |
Relative vapor density (air =1) : | 7.1 | formula weight: | 206.32 |
Heat of combustion (kJ / mol) : | non-avaible | Critical Pressure (MPa): | non-avaible |
Bblast% (V / V) : | non-avaible | Lower limit% (V / V) : | non-avaible |
Appearance and traits : | Colorless liquid, with a slight ether flavor and a bitter taste. | ||
main application : | Used as a solvent for paint, resin, dye, oil, and also as a coupling and dispersant. | ||
Other physical and chemical properties : | non-avaible | ||
Part X: Stability and reactivity | |
stability : | stabilize |
Prohibited: | Strong oxidant. |
Conditions to avoid contact: | beam. |
Polymerization hazard: | Cant appear |
cleavage product: | non-avaible |
Part X: Toxicology information | |
acute toxicity: | LD50:3300 mg/kg (rat mouth) LC50 : |
Subacute and chronic toxicity: | non-avaible |
RTECS: | non-avaible |
thrill: | non-avaible |
sensitization: | non-avaible |
mutagenicit y: | non-avaible |
teratogenicity: | non-avaible |
carcinogenicity: | non-avaible |
Part XII: Ecological data | |
Eco-toxicological toxicity: | non-avaible |
biodegradability: | non-avaible |
Non-biological degradability: | non-avaible |
Biological enrichment or bioaccumulability: | non-avaible |
Other harmful effects: | After work, take a shower and change your clothes. Pay attention to personal hygiene. |
Part 13: Waste disposal | |
Waste property : | Refer to the relevant national and local laws and regulations before disposal. It is recommended to dispose of it by incineration method. |
Waste disposal method: | non-avaible |
Waste considerations : | non-avaible |
Product Description
DOWANOLTM TPM glycol ether is a hydrophilic,slow-evaporating glycol ether with an excellent active solvency and coupling power. DOWANOLTM TPM glycol ether is an ideal choice when high polymer solvency and extended system residence time are required. It can maintain rheological properties over time in products such as stamp pads and ballpoint pen inks. Its high boiling and flashpoints make it an excellent choice for use in oven cleaners, and as a tailing solvent in high-solids,solvent-based coatings.
Applications
Solvent for stamp pad inks and ballpointand felt tip writing pen inks.
Coupling agent and solvent inrust, paint, and varnish removers, hard surface cleaners, and penetrating oils.
Mutual solvent,coupling agent, and emolient in cosmetic formulations Stabilizer for agricultural herbicides.
Typical Physical Properties
Property | Value |
Molecular Weight (g/mol) | 206.3 |
Boiling Point@760 mmHg,1.01 ar | 243℃ (469 F) |
Flash Point (Setaflash Closed Cup | 124℃(255 °F) |
Freezing Point | 78C(-108°F) |
Vapor pressure@20°℃—extrapolated | 0.01 mmHg |
1.7 Pa | |
Specific gravity (25/25℃) | 0.965 |
Liquid Density @20℃ @25°℃ | 0.965 g/cm3 0.962 g/cm3 |
Vapor Density (air =1) | 7.15 |
Viscosity (mm2/s@25°℃) | 5.5 |
Surface tension(dynes/cm or mN/m@20℃) | 30 |
Specific heat (J/g/℃@25°℃) | 2.12 |
Heat of vaporization(J/g)at normal boiling | 210 |
point | |
Net heat of combustion(kJ/g)—predicted @25°C | 27.8 |
Autoignition temperature | 277℃ (531°F) |
Evaporation rate (n-butyl acetate=1.0) | <0.01 |
Solubility,g/100 or %@25℃ | 100% |
Solvent in water | |
Hansen solubility parameters | |
(J/cm³)12 | 15.1 3.5 11.5 |
_d(Dispersion) _p(Polar) | |
_h(Hydrogen bonding) | |
Partition Coefficient,n-octanolwater (log Pow) | 0.309 |
Flammable limits(vol.%in air) | |
Iower | 0.8 |
Upper | 8.5 |
Typical Physical Properties: This data provided for those properties are typicalvalues,and should not beconstrued as sales specfications
Classification/Registry Numbers/Country Inventorye.
CAS# | 25498-49-1 |
AICS (Australia) | 25498-49-1 |
DSL(Canada) | 25498-49-1 |
IECSC (China) | 25498-49-1 |
ECI (Korea) | 25498-49-1/KE-23313 |
EINECS (EU) | 247-045-4 |
MITI Japan) | 25498-49-1 |
ENCS/ISHL(Japan) | 7-97 |
NZloC (New Zealand) | 25498-49-1 |
PICCS (Philippines) | 25498-49-1 |
TSCA(U.S.) | 25498-49-1 |
@NOTE:Clasfications apply only to this glycol ether product.Itis the responsibilityof the formulator to ensure that the final finished product complies with the regulations ofa given countyprior to its sale or distribution inthat country.
How Supplied
REGION | PACKAGING | TRANSPORT MODE |
Europe/Africa | Bulk/Drum | Tank Truck |
Latin America | Bulk/Drum | Tank Truck |
North America | Bulk/Drum | Tank Truck/Tank Car |
Pacific | Bulk/Drum | Tank Truck |
Product Stewardship
Dow encourages its customers and potential users to review their applications from the standpoint of human health and environmental aspects.To help ensure that Dow products are not used in ways for which they are not intended or tested,Dow personnel will assist customers in dealing with environmental and product safety considerations.Dow literature,including Material Safety Data Sheets,should be consulted prior to the use.
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China